Changing The Time Program; Setting The Week Program (All Days Identical) - Honeywell HR 40 Instrucciones De Montaje

Changing the time program

The HR 40 has two independent time programs:
- The week program uses the same time program for all the days.
- With the day program you can set an individual time program for each
weekday.
Note: Please note that two switching points each determine a heating period.

Setting the week program (all days identical):

1. Press the
PROG
is displayed.
PROG
2. Select
3. Confirm with the
4. Use the adjustment dial to set the 1st switching point.
5. Confirm with the
6. Use the adjustment dial to set the 2nd switching point.
7. Confirm with the
8. End the procedure with the
– or –
Set the switching points 3 and 4 for the second heating period.
The new periods are programmed.
36
button.
using the adjustment dial.
button.
PROG
button.
PROG
button.
PROG
AUTO
MANU
button.