Disposal; Description; General Description And Method Of Operation; Scope Of Supply - SFA SANIPUMP Manual De Uso

Ocultar thumbs Ver también para SANIPUMP:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 136
Weight of the pumping station
SANIPUMP
with 10 meters of cable and float
®

2.3 Disposal

At the end of its life, this product must be returned to a dedicated collection point.
• It cannot be treated as household waste.
• Ask your local council about where to take the old appliance so that it can be recycled or
destroyed.

3. DESCRIPTION

3.1 General description and method of operation

SANIPUMP
is a waste water pumping station specially developed for private and commercial
®
use.
It is not intended for pumping rainwater.
It can be installed in an outdoor sump (pumping grey water and black water) or inside a building
(pumping of grey water only).
Its operating principle is as follows: when the level of effluents contained in the
sump where the SANIPUMP
the pumping station.
The effluent is then shredded by the SFA system and automatically pumped to
then drain into the sewer pipe.
Waste water is discharged by a DN 40 (ext. diameter 50).

3.2 Scope of supply

Submersible SANIPUMP
H05VV-F-3G type 1.5 mm², with a length of 10 metres.

3.3 Rating plate

1 Name of the pumping station
2 Power consumption of motors
3 Power supply voltage
4 Frequency
5 Protection index
6 Production date
7 ID number
8 Type of certification
is installed is sufficient, the float switch starts up
®
pump with float switch, mounting base and pump power supply cable
®
Weight
13 kg
1
8
2
3
4
5
6
7
21

Publicidad

Tabla de contenido
loading

Tabla de contenido