Super Cooling; Clean Lock; Eco Mode; Self-Test - Thermador T23IR905SP Manual De Uso Y Cuidado

en-us Operating the appliance

Super cooling

Super cooling cools the refrigerator compartment as
cold as possible.
Switch on super cooling, e.g.:
Before placing large quantities of food into the
■
compartment
For cooling drinks quickly
■
Note: When super cooling is switched on, increased
operating noises may occur.
After approx. 6 hours, the appliance switches to
normal operation.
Switch on super cooling:
To open the menu for setting the temperature,
1.
press : button.
Press / button.
2.
When super cooling is switched on, the symbol /
appears on the display.
Confirm the selection by pressing 8 button. If the
3.
button is not pressed, the appliance stores the
setting and automatically returns to the main
screen after a few seconds.
Switch off super cooling:
To open the menu for setting the temperature,
1.
press : button.
Press > button.
2.
When super cooling is switched off, the symbol /
disappears from the display.
Confirm the selection by pressing 8 button. If the
3.
button is not pressed, the appliance stores the
setting and automatically returns to the main
screen after a few seconds.

Clean lock

You can use this function to switch off the touch
function of the controls for 10 seconds. During this
time you can clean the display.
~ "Cleaning the display" on page 18
Press " button to open the Settings menu.
1.
Press < button.
2.
The cleaning display appears, and the countdown
starts.
12
Automatic clean lock
You can use this function to select whether the
automatic clean lock is switched on automatically
when the door is opened.
Press " button to open the Settings menu.
1.
Use ( button to move to the menu item Appliance
2.
settings.
Press 8 button.
3.
Press ) button to move to the menu
4.
item Automatic clean lock.
To change the setting, press : button.
5.

Eco mode

Eco mode switches the appliance to energy-saving
operation.
The appliance automatically sets the following
temperatures:
Refrigerator compartment: +43° F (6° C)
■
Cool-fresh container: +35° F (2° C)
■
Switching Eco mode on or off
Press " button to open the Settings menu.
1.
Press ) button to move to the menu item Eco
2.
mode.
Press </= button.
3.
The temperature is changed and the display shows
the new temperature. When Eco mode is switched
off, the recommended temperature is set.
Note: You can also switch Eco mode on or off by
adjusting the temperature with +/- buttons.

Self-test

This function can be used to start fault analysis on
your appliance.
~ "Appliance self-test" on page 22

Setting the brightness of the control panel

Press " button to open the Settings menu.
1.
Use ( button to move to the menu item Appliance
2.
settings.
Press 8 button.
3.
Press : button to open the menu
4.
item Brightness.
Press ( ) buttons to set the required brightness.
5.
Press 8 button.
6.
The setting is saved.
Press ; button to exit the menu.
7.