Remote Commander Rm-921 - Sony PFM-500A2WU Manual De Instrucciones

Location and Function of Parts and Controls

Remote Commander RM-921

1 POWER switch
Press to turn on the monitor. Press again to go back to
the standby mode.
Note
When using multiple monitors, press this switch to
turn monitors which are already on into the standby
mode, or turn on monitors which are in the standby
mode.
2 MUTING button
Press to mute the sound. Press this button again or
press the VOL (volume) +/– button to obtain the sound
again.
3 RGB1/RGB2 buttons
Select the signal input from the RGB1 or RGB2
connectors.
12 12
(EN)
1
MUTING DISPLAY POWER
2
RGB1 RGB2 YUV
3
4
LINE Y/C
MTS/MPX
5
1 2
6
4 5
7 8
10/0 CH
7
DEGAUSS
STILL ZOOM
8
POWER
SELECT
ON MENU
9
OFF ENTER
0
ON
VOL
SET
!¡
OFF
ID MODE
4 LINE button
Selects the signal input from the VIDEO IN connector
in the LINE connectors.
5 Y/C button
Selects the signal input from the Y/C IN jack in the
LINE connectors.
6 Number buttons
Press to select the index number.
7 ZOOM button
Adjusts the zoom. Each time you press the ZOOM
button, the picture is magnified by two, three, and four
times respectively.
8 STILL button
Freezes a picture on the monitor screen. Press again to
resume normal screen.
!™
!£
!¢
3
6
9
!∞
!§
!¶
!•
!ª
@º
CH
@¡