Sony PFM-500A2WU Manual De Instrucciones página 19

PIC SIZE menu
This menu is used for zooming, positioning, and
resizing the picture.
8
P I C S I Z E
9
H S I Z E
H S H I F T
0
V S I Z E
!¡
V S H I F T
Z O O M
!™
A S P E C T
!£
R E S E T
S E L E C T
!¢ ENTER
8 H SIZE
Adjusts the horizontal picture size. Press > to enlarge
the horizontal size and press . to diminish it.
9 H SHIFT
Adjusts the horizontal centering. Press > to move the
picture to the right and press . to move it to the left.
0 V SIZE
Adjusts the vertical picture size. Press > to enlarge the
vertical size and press . to diminish it.
Note
Enlarging the image while the monitor is receiving
HDTV signals may cause the monitor to go into the
Offset Sampling Mode resulting in a blurred image.
!¡ V SHIFT
Adjusts the vertical centering. Press > to move the
picture up and press . to move it down.
!™ ZOOM
Zooms up the picture two, three, and four times.
Note
Enlarging the image while the monitor is receiving
HDTV signals may cause the monitor to go into the
Offset Sampling Mode resulting in a blurred image.
!£ ASPECT
Set the aspect ratio of the picture to 4:3 or 16:9.
!¢ RESET
Select to restore the factory settings in the PIC SIZE
menu items 8 to !£.
For details on using the reset function, see "Restoring the
Original Picture Size and Position" on page 27(EN).
: 0 0
: 0 0
: 0 0
: 0 0
: x 1
: 4 x 3
C A N C E L
MENU
CONFIG menu
This menu is used for adjusting the signal or selecting
the language.
!∞
C O N F I G
E N H A N C E
!§
H F I L T E R
!¶
D I S P L A Y
P O W E R S A V E
!•
L A N G U A G E
!ª
S E L E C T
ENTER
!∞ ENHANCE (Sharpness)
You can change the outline correction level:
LOW: Default setting for VIDEO signal
HIGH: Default setting for computer signal
!§ H FILTER
Select AUTO normally.
Select HIGH when the ringing appears on the screen.
Select LOW when the moiré pattern or noise appears
on the screen. The moiré pattern or noise decreases
even the screen looks a little blurred.
!¶ DISPLAY
Select ON to display the input signal information for
about five seconds on the top of the monitor screen
when turning on the power or switching the input
signal.
!• POWER SAVE
Set the time period to activate the power saving mode.
For details on the power saving function, see "Turning Off
the Power Automatically When There Is No Input Signal
(Power Saving Function)" on page 30(EN).
!ª LANGUAGE
Select the on-screen language among five languages.
Available languages are: English, German, French,
Italian and Spanish.
For details on selecting the language, see "Selecting the
On-screen Language" on page 31(EN).
: H I G H
: A U T O
: O N
: 5 m
C A N C E L
MENU
19
(EN)