Cleaning And Care - Silvercrest SKF 2800 B2 Instrucciones De Uso

Cleaning and care

WARNING – RISK OF ELECTRIC SHOCK!
► Always remove the plug from the mains power socket before cleaning the
appliance.
►
the housing into water. Do not clean them under running water! This will
irreparably damage the appliance. If required, clean the device with a
damp cloth.
► Never open the appliance's operating/heating element
WARNING – RISK OF BURNS!
► Allow the appliance to cool down completely before cleaning it.
CAUTION – PROPERTY DAMAGE!
► When cleaning the components, do not use aggressive or abrasive cleaning
agents or materials such as scouring milk or steel wool. These could damage
the upper surface of the appliance!
To simplify cleaning, dismantle the deep fat fryer:
1) Open the appliance lid and pull it upwards and out.
2) Pull the handle upwards until it audibly engages. Remove the frying basket
3) Pull the control/heating element
control/heating element
4) Take out the stainless steel container
NOTE
The frying basket
in the dishwasher. They are suitable for dishwashers.
5) Clean the housing and the appliance lid with a damp cloth. If required, use
a mild detergent on the cloth.
6) Clean the control/heating element
little mild detergent to the cloth. Wipe this off afterwards using a damp cloth
so that all detergent residue is removed. Dry the control/heating element
thoroughly.
■ 80 │ GB │ MT
Never immerse the control/heating element
and the stainless steel container
upwards out of the guide rails. Place the
in a clean and dry location.
and remove the fat or oil.
with a damp cloth. If necessary, add a
, the power cord or
.
can be cleaned
SKF 2800 B2
.