4.
Functional description
4.1
Start monitor
In the status strip (1), the current machine data are displayed. Via
the functional keys F1 to F6 (3), the various main functions are
called.
1
2
3
Functional key assignment start monitor
F1 Basic settings:
Change-over to the monitor „Basic settings"
F2 Zero sequence:
Execution of the „Zero sequence"
F3 Calibration sequence:
Execution of the „Calibration"
F4 Wheel data:
Change-over to the „Wheel data detection"
F5 Balancing:
Change-over to the monitor for starting
the balancing process
F6 System information:
Display of the balancing processes executed up to
this point Information on the software statuses
1 689 979 918N
13.01.2010
4.1.1
Basic settings
Here, the individual basic settings for the machine are made. From
the start monitor, the corresponding monitor is called via the F1
key.
Functional key assignment basic settings
F1 Change of range:
Change-over between the left-hand menu and the
right-hand value range
F2 / F3 Change of range in upward / downward direction:
Selection of the individual menu items
F4 / F5 Movement to the left-hand side / right-hand side:
Value selection / settings for the individual menu
items
F6 Enter:
Taking over of the input data or of the changed values
27