Before Using The Appliance; Description Of Buttons - Unold 48876 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 72
22. Do not use any sharp objects
to take out the ice cream.
Only use plastic or wooden
spoons or spatulas.
23. Check the plug and power
cord regularly for wear and
damage. In case of a fault,
please send the appliance
Never place hand in machine when in operation – risk of injury!
After unpacking, please do not operate the appliance for at least two hours.
The coolant in the appliance has to first settle, to prevent damage to the
compressor.
When unpacking the appliance and removing the packaging material, make
sure not to tilt the appliance more than 45 °, to prevent damage to the com-
pressor inside the appliance.
The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.

BEFORE USING THE APPLIANCE

1.
Before taking your ice cream
maker into operation for the first
time, we recommend to rinse
all removable parts – except the
compressor casing (4) – in warm
water.

DESCRIPTION OF BUTTONS

Button "Power"
When the plug is in the power socket, the appliance is in the stand-by-mode. The
display shows "00". Press the button in order to turn on the appliance. The dis-
play lights up and shows "60:00". In order to turn off the appliance during ope-
ration, press this button as well.
Button "Menu"
With this button, you choose between the three preparation programmes "Mix
& Freeze", "Freeze" or only "Mix". When the appliance is in operation, if you
press the button for approx. 3 seconds, the appliance will return to the original
settings.
26
Copyright UNOLD AG | www.unold.de
for inspection/repair to our
after sales service.
24. Inadequate repair may cons-
titute a risk for the user and
result in the loss of guaran-
tee.
25. Warning: fill with foodstuff
only.
2.
Wipe the casing and slot for the
ice cream bowl with a damp, well-
wrung cloth.
3.
Place the appliance on a dry, level
work surface.

Publicidad

Tabla de contenido
loading

Tabla de contenido