Remote Control Unit - Astralpool Corail protect Manual De Uso

REMOTE CONTROL UNIT

Control indicator
Monitoring
indicator
Monitoring mode activation/desactivation buttons
Opening the unit:
1 – Remove the side srews caps
2 – Remove the screws holding the cover in place
3 – Remove the screws holding the plate in place
4 – Fix the unit in place with screws, drilling through the back of the box at the spots provided for the
purpose screws 3,5 x 16 mm
5-Drill a hole 9,5 Ø in diameter to feed the cables through,m on the underside of the unit box.Use the
cable gland supplied
The remote control unit must be installed out
of the reach of children under 5 years of age. It
must thus be placed at a height of at least
1.60m above the ground.
Control Led
Monitoring Led
Button A
Buzzer
Button B
versión 1-2008
10