Precautions For Installation - Astralpool Corail protect Manual De Uso

3.

PRECAUTIONS FOR INSTALLATION

To install the beacons correctly, it is important to comply with certain rules.
INCORRECT
Do no put 2 barriers in the same alignment;
possibility of interference between the 2
barriers
The barriers must be installed on flat surfaces. Any
irregularities in the ground cuold create zones where
children might be able to crawl under the beams.
Maximum distance between beacons = 30 m
Do not install the beacons
on unstable supports
Do not install the beams parallel to glazed
surfaces and less than 1 m from them
Check that no vegetation can mask the beam
or beams, whatever the season
CORRECT
Note: Pay special care to the cross-section of
the cables used (see 4.5.4.4)
Zone no monitored
versión 1-2008
13