Memory Function (Saving Measurement Data) - Hioki FT6380 Manual De Instrucciones

38
2.5 Convenient function

Memory function (Saving measurement data)

Press the MEM
current measurement mode. The instrument will beep three
times and the displayed measured value will be stored along
with the memory number (1 to 2,000) in the instrument's internal
memory.
When the number of values saved in the instrument's memory
reaches 2,000, the display will show "FULL," and you will not
be able to save additional values. Delete unneeded values to
free up space.
* Measured values, filter use, and the [
marks are saved in memory.
key in either resistance measurement mode or
Memory number
] and [ ]