Enabling/Disabling The Auto-Power-Saving (Aps) Function - Hioki FT6380 Manual De Instrucciones

Enabling/disabling the auto-power-saving (APS)
function
The auto-power-saving (APS) function prevents unintentional
battery consumption when you forget to turn off the instrument.
The APS function activates automatically when the instrument is
turned on. The instrument will automatically turn off once about
5 minutes pass without any operation (an alarm will sound for
about 10 seconds first).
Pressing any key while the alarm sounds will reset the time
before the instrument turns off to about 5 minutes.
1.
Enter sub-function mode.
Press the
2.
Using the
and press the
3.
Using the
and press the
When the APS function is disabled in sub-function mode,
APS will remain disabled when the instrument's power is
cycled.
2.6 Advanced Settings and Functions
POWER key while holding down the
▼ ▲
and keys, select the APS Setting screen
OK key.
▼ ▲
and keys, switch the APS function on or off
OK key.
The APS function is enabled
when the screen shows
53
Fn key.
[on]
.