Hioki FT6380 Manual De Instrucciones página 65

Function specifications (underline: default value)
Data hold function
Backlight functionAutomatically turns off approx. 2 min. after last key operation.
Filter function
Resistance Moving average time: Max. 9 sec.
measurement
filter function
Current Cutoff frequency: 180 Hz ±30 Hz (-3 dB)
measurement
filter function
Alarm function
Resistance alarm Resistance measurement mode alarm: Beeps when measured
function value is less than or greater than threshold.
Current alarm Current measurement mode alarm: Beeps when measured value
function is less than or greater than threshold.
Alarm Hi/Lo Separate Hi/Lo settings for resistance measurement and current
measurement
Resistance measurement: Hi.AL/Lo.AL
Current measurement: Hi.AL/Lo.AL
Resistance measurement: 0.02 Ω to 1,600 Ω
Alarm threshold
Resistance measurement initial value: 25.0 Ω
setting range
Current measurement: 0.05 mA to 200.0 mA, 0.201 A to 60.0 A
Current measurement initial value: 1.00 mA
Memory function
Memory capacity 2,000 values
Auto-power-save Instrument automatically turns off approx. 5 min. after last key
function operation.
Function mode
Moving between After selecting setting item with
items key.
AL Ω: Resistance Hi/Lo, threshold settings
Resistance alarm
function
Current alarm AL A: Current Hi/Lo, threshold settings
function
Loading memory MEM READ: Load memory values.
values
Clearing MEM CLR: Clear last saved memory value or all values.
memory values
®
Bluetooth BT: ON/OFF (FT6381)
operating setting
3.2 General Specifications
▼ ▲
and keys, accept with
61
OK