HQ-Power VDPL601MH 14 Serie Manual Del Usuario página 8

display description
14 channel mode
pan angle
tilt angle
reset
load default settings
DMX Mode
This mode allows you to control the fixture by any universal DMX controller.
 All DMX-controlled devices need a digital start address so that the correct device responds to the signals.
This digital start address is the channel number from which the device starts to "listen" to the DMX
controller. The same starting address can be used for a whole group of devices or an individual address can
be set for every device.
 When all devices have the same address, all the units will "listen" to the control signal on one particular
channel. In other words: changing the settings of one channel will affect all devices simultaneously. If you
set individual addresses, each device will "listen" to a separate channel number. Changing the settings of
one channel will only affect the device in question.
 In case of the 8-channel VDPL601MHx14, you will have to set the start address of the first unit to 1
(CH1~8), the second unit to 9 (1 + 8) (CH9~16), the third to 17 (9 + 8) (CH17~24), and so on.
 In case of the 14-channel VDPL601MHx14, you will have to set the start address of the first unit to 1
(CH1~14), the second unit to 15 (1 + 14) (CH15~28), the third to 29 (15 + 14) (CH29~42), and so on.
 Press <MENU> until
 Use <UP> or <DOWN> to set the DMX starting address (
DMX Channel Values – 8 channel mode
Value
Channel
from
1 0
2 0
0
4
8
12
16
20
3 24
28
32
36
40
128
192
0
4
4
8
216
V. 03 – 29/09/2014
VDPL601MHx14
press
<ENTER>
<ENTER>
<ENTER>
<ENTER>
<ENTER>
is displayed.
Function
to
255 pan
255 tilt
3 White
7 Colour wheel 1
11 Colour wheel 2
15 Colour wheel 3
19 Colour wheel 4
23 Colour wheel 5
27 Colour wheel 6
31 Colour wheel 7
35 Colour wheel 8
39 Colour wheel 9
127 mixed colours
191 Clockwise rainbow effect, slow -> fast
255 anticlockwise rainbow effect, slow -> fast
3 OFF
7 ON
215 Strobe, slow -> fast
255 ON
display shows
~
8
remark
8 channel mode
pan over 540°
pan over 360°
pan over 180°
tilt over 270°
tilt over 180°
tilt over 90°
).
©Velleman nv