Tecno-gaz Hydra EVO Instrucciones De Uso página 26

ENGLISH
14. Make sure that the electrical system to which the device is connected is produced
according to the laws in force and has the suitable dimensions for the device features;
see PAR.2 of this manual.
15. Connect the device pin to a socket with a rated voltage of 230V 10% MONOPHASE +
EARTH, frequency 50/60Hz, current 12A, as shown on the identification plate place in
the rear side of the device.
16. Never connect the device pin to reductions of any type.
17. Load the filling tank as explained on PAR. 8 of this manual.
18. After the installation, carry out a LOADED sterilisation cycle as explained on PAR. 10 of
this manual.
8
Photo A