Setting Time And Date; Display Mode Setting; Volume Setting - Palazzetti BLE Manual De Uso Y Funciones

3.3 Initial settings
Before using the stove, it is necessary to set the current date and time.

3.3.1 Setting time and date

To change the date:
a) Use the keys on the set-up menu
b) Select the password "7" with the
c) Scroll with the key, select the submenu
d) The hour value will flash; change the value with the
e) The minutes value will flash; change the value with the
f) The value of the day will flash; change the value with the
g) The value of the month will flash; change the value with the
h) The value of the year will flash; change the value with the
i) The value of the current day of the week will flash (Monday =
the keys;
j) Press the key to confirm the data entered.
3.3.2 Display brightness setting
It is possible to set the dimming of the display brightness when in standby mode.
a) Use the arrow keys
b) Select the password "7" with the
c) Scroll with the key and select the sub-menu
d) Use the and
key.

3.3.3 Display mode setting

I t is possible to set what should be shown on the display when the latter is in standby mode
a) Use the arrow keys
b) Select the password "
c) Scroll with the key and select the sub-menu
d) Set with the keys
OFF
" "
•
1
" " •
2
" "
•
3
•
" "
4
•
" "
. Press the key to confirm the set data.

3.3.4 Volume setting

S et the volume level of the buzzer, according to your requirements:
a) Use the arrow keys
b) Select the password "7" with the
c) scroll with the key and select the submenu
d) Use the and keys to set the desired volume level (
26
key and confirm with the
to go to the set-up menu
key and confirm with the
keys to set the desired brightness value (
to go to the set-up menu
7
" with the key and confirm with the
and one of the following values:
The display will remain fixed on the last display operated by the user;
All the operating parameters will be displayed cyclically;
The temperature is displayed (detected by the room probe)
The current time is displayed
The autonomy is displayed in hours before having to refill the tank, if the refuelling
function has been enabled.
to go to the set-up menu
key and confirm with the
and press the key
key;
[ ]
3
and confirm with the
keys and press the
keys and press the
keys and press the
keys and press the
1
... Sunday =
and press the
[11]
and confirm with the
OFF
and press the
[12]
and confirm with the
and press the
[13]
and confirm with the
OFF,1 ... 5
key;
key;
key;
key;
keys and press the
key;
7
); change the value with
key;
key;
key;
, 1 ... 5
) and confirm with the
key;
key;
key;
key;
key;
key;
) and confirm with the
004778040 - 07/10/2020
key;
key.