Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5.1.2 Assigning program to days
With this function it is possible to assign up to three different programs to a specific day.
a) Use the
arrow keys to go to the set-up menu
b) Select the password "7" with the
c) Select the submenu
d) Use the
and
keys to choose the day [d1] ... [d7] with which to associate the programs;
e) Select it with the
f) The value of the first program to be assigned will flash:
g) Change the value with the
h) The value of the second program to be assigned will flash:
i) Change the value with the
j) The value of the third program to be assigned will flash:
k) Change the value with the
5.1.3 Timer enabling/disabling
a) Use the
arrow keys to go to the Timer menu
b) Confirm with the
c) Scroll with the
and
d) Press the
key to confirm the selection.
When the timer is enabled, the fixed icon
5.2 "Eco mode" saving function
By enabling this function, the stove is turned off when the desired room temperature is reached. If this
function is not enabled, the stove modulates its operation to maintain the desired temperature while
consuming as little as possible.
The "Eco Mode" function is only available in configuration 1.
To enable/disable this function:
a) Use the
arrow keys to go to the set-up menu
b) Select the password "7" with the
c) select the submenu
d) Set one of the following values with the
Eco
→ It enables the "Eco Mode" function
Off
→ It disables the "Eco Mode" function
. Press the key
to confirm the set data.
5.3 Re-ignition delta function
The re-ignition delta is the number of degrees below the switch-off temperature beyond which the stove
automatically switches on again. For example, if the stove is set to switch off at 20°C (Eco Mode active) and
we set a "Re-ignition delta" of 4°C, the stove will turn back on when it detects a temperature lower than
or equal to 16°C.
To change the value of the re-ignition delta:
a) Use the
arrow keys to go to the set-up menu
b) Select the password "7" with the
c) Select the submenu
d) The value will flash; modify it with the
e) Press the
key to confirm the set data.
004778040 - 07/10/2020
ITALIANO
ENGLISH
key and confirm with the
[1]
and confirm with the
key;
and
keys and press the
keys and
and press the
and
keys and press the key
key;
ON
keys and select: "
will appear to indicate that the timer is active.
key and confirm with the
[7]
and confirm with the key
and
key and confirm with the
[8]
and confirm with the
and
DEUTSCH
and press the
key;
key;
P1...P6
OFF
or "
key;
P1...P6
or "
key;
P1...P6
OFF
or "
to confirm the set data.
.
" to enable the timer or "
and press the
key;
.
keys:
and press the
key;
key;
0.5 ... 5.0°C
keys (
);
FRANÇAIS
ESPAÑOL
key;
" to disable it;
OFF
" to disable it;
" to disable it;
OFF
" to disable it.
key;
key;
29
Publicidad
Tabla de contenido
