Progress PHN 1320 Instrucciones De Uso página 19

Changing the interior light bulb
Separate the appliance from the
power supply by switching off
the fuse.
If the oven light needs replacing, the new
bulb must have the following specifications:
- Electric power: 15 W / 25 W
- Electric voltage: 230 V (50 Hz)
- Heat resistance to 300 °C
- Type of connection: E14
These replacement bulbs can be
purchased from your dealer.
To change the oven light:
1. First ensure that the oven has cooled
down and has been disconnected from
the mains.
2. Turn the glass cover of the light counter-
clockwise.
3. Remove the used bulb and insert a new
one.
4. Replace the glass cover and reconnect the
oven to the mains.
Oven shelves and shelf supports
Immerse the oven shelves in warm
soapy water to clean them and remove
stubborn dirt with a sponge thoroughly
impregnated with soap.
Rinse well and dry with a soft cloth.
The shelf supports are to be removed for
cleaning.
Proceed as follows:
1. First ensure that the oven has cooled
down and has been disconnected from
the mains.
2. Remove the front screw, holding the grill
support with the other hand.
3. Disengage the rear hook and take off the
shelf support.
4. Re-insert the shelf supports after
cleaning; to do so, reverse the above
sequence.
Before inserting the oven shelves,
ensure that the retaining nuts have been
properly tightened.
19 progress