Lock Control Panel - effegibi Nuvola Smart Power Manual De Uso Y Mantenimiento

5. LOCK CONTROL PANEL

Press the temperature control buttons "C" and "A" individually, firmly and in quick sequence (see Fig. G).
fig. G
Then hold down button "A" again (see Fig. H) until the icon comes on.
fig. H
The control panel can only be locked when the steam generator is switched off.
All the control panel buttons will be disabled, maintaining their status, with the exception of the ON/OFF button
which will not be disabled.
If one of the locked keys is pressed, it will flash.
Repeat the above sequence to unlock the control panel.
PLEASE NOTE: the lock control panel sequence must be run for every panel and therefore, if the Hammam has a
second external panel, the above instructions must also be followed for this panel.
N.B.
To stop any Hammam session, press the ON/OFF button for 5 seconds.
The data and features referred to are not binding on EFFEGIBI and the company reserves the right to make any appropriate changes
OPERATING AND MAINTENANCE MANUAL
FOR NUVOLA SMART POWER
A C
2 1
A
3
without having to give prior notice or replace this manual.
EN
19