Control Screen; Control Display; Preparation Of Machine; How To Unpack The Machine - Hillyard Trident R26SC Pro Manual De Uso

CONTROL SCREEN

9
8
7
6

CONTROL DISPLAY

1
3
2
1
2
7

HOW TO UNPACK THE MACHINE

The machine is shipped in specific packaging. To remove it, proceed as follows:
1. Place the lower part of the outer packaging in contact with the floor.
NB: use the pictograms printed on the box as a reference.
2. Remove the outer package.
WARNING: the machine is contained in specific packaging materials, whose elements (plastic bags, staples, etc.) can pose potential hazards, and must not be left within reach of children, disabled
persons, etc.
CAUTION: these operations must be carried out using protective gloves to avoid any possible contact with the edges or tips of metal objects.
3. Insert a ramp in the rear part of the machine.
ATTENTION: the ramp gradient must not be such as to cause damage to the machine as it comes down.
4. The machine is fixed to the pallet with wedges (1) that block the wheels (Fig.1). Remove these wedges.
5. Move to the right rear part of the machine and check that the electro-brake, present in the traction gear motor, is not engaged. Turn the lever (2) clockwise (Fig.2).
6. Drive the machine down the ramp.
ATTENTION: during this operation, check there are no people or objects near the machine.
2
1
1 2
The control screen is divided in:
1.
2.
3.
4.
5.
6.
7.
8.
1
9.
2
3
4
5
The control display is divided in:
4
1. Detergent solution level in the machines water system.
2. ECO-MODE active symbol.
5
3. Hour meter.
4. Battery charge level.
6
5. Fleet management system "connected" symbol (versions with HFM).
6. Forward speed level of the machine.
7. Brush head extra pressure function "active" symbol.

PREPARATION OF MACHINE

Buttons for movement speed adjustment.
"ECO MODE" control button.
Brush head control/ brush uncoupling button (only for the single-brush version).
"AREA 2" program activation button.
"AREA 3" program activation button.
"AREA 1" program activation button.
Squeegee/ HNC "HILLYARD NOISE CANCELLING" function control button.
Buttons for water flow selector.
Control display.
11