Serial Number Plate; Technical Data - Hillyard Trident R26SC Pro Manual De Uso

SERIAL NUMBER PLATE

11
10
9
8
7
6
Rated machine power
Working capacity up to
Working width
Squeegee width
Central brush head brushes (number -Ø external bristles)
Rpm of the individual brush on the central brush head
Electrical characteristics of the brush head motor
Weight exerted on the brush head
Electrical characteristics of the traction motor
Gradeability ("TRANSFER" working program, weight of machine in transport with operator on board)
Maximum forward movement speed ("TRANSFER" working program, weight of machine in transport with operator on board)
Electrical characteristics of the suction motor
Vacuum on vacuum head
Maximum solution tank capacity
Maximum recovery tank capacity
Solution tank maximum capacity (versions with HDC system)
Turning circle
Turning space for U-turn
Machine dimensions (length - width without squeegee - height)
Machine dimensions (length - width with squeegee - height)
Single battery compartment dimension (useful length - width - height)
Number of batteries - Recommended nominal voltage rating of the battery
Maximum battery weight (recommended)
Machine weight
(1)
Machine weight during transport
(2)
Weight of the machine ready for use (3)
Sound pressure on the operator's ears (ISO 11201, ISO 4871, EN 60335-2-72) (L
Uncertainty K
pa
Vibration level on the operator's arms (ISO 5349-1, EN 60335-2-72)
Vibration level on the operator's body (ISO 5349-1, EN 60335-2-72)
Vibration measurement uncertainty
Remarks:
(1) Machine weight: refers to the overall weight of the machine, without the batteries or the operator on board, and with both tanks empty.
(2) Machine weight during transport: refers to the overall weight of the machine with the batteries on board, without the operator on board, and with both tanks empty.
(3) Machine weight during work operations: refers to the overall machine weight with the batteries, with the solution tank full, but with the recovery tank empty and with the weight of the operator on-board
(theoretical weight of 75kg).
1
2
3
4
5

TECHNICAL DATA

)
pA
8
The serial number plate is located at the rear of the steering column, and indicates the machine's
general characteristics, including its serial number. The serial number is a very important piece of
information and should always be provided together with any request for assistance or when
purchasing spare parts. The serial number plate contains the following:
1. The weight of the batteries used to power the appliance (value expressed in kg/lbs).
2. The IP protection rating of the appliance.
3. The gross weight of the appliance (expressed in kg/lbs).
4. The identification code of the appliance.
5. The serial number of the appliance.
6. The name of the appliance.
7. The nominal power consumed by the appliance (expressed in W).
8. The maximum grade that the appliance can handle during work activities (expressed in %).
9. The year in which the appliance was manufactured.
10. The nominal voltage of the appliance (expressed in V).
11. The commercial name of the appliance and the manufacturer's address.
U/M TRIDENT
[U.S.C.U.] R26SC Pro
W 1722
sq. /h 24488
ft
in 25,5
in 30,79
No. / in 2 - 13,39
rpm 140
V / W 24 - 500
lb 88 ÷ 132
V / W 24 - 300
% 17
mph 3,5
V / W 24 - 422
mbar 101
gal 14
gal 14,5
gal 0,8
in 30,12
in 71,85
in 50,59 - 27,95 - 46,85
in 50,59 - 30,71 - 46,85
in 13,78 - 7,48 - 12,2
N - (V - AhC5) 2 - (12 - 112)
lb 86
lb 381
lb 553
lb 860
dB (A) 64,8
dB (A) 1,5
m/s 0,62
2
m/s 0,47
2
1,5%