Power Management Function; Flexible Induction Cooking Area; Flexibridge Function - Electrolux EHX8565FOK Manual De Instrucciones

• Count Down Timer comes down
• you put something on the control
panel.
4.12 Power management
function
• Cooking zones are grouped according
to the location and number of the
phases in the hob. See the illustration.
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds
3700 W.

5. FLEXIBLE INDUCTION COOKING AREA

5.1 FlexiBridge function

The flexible induction cooking area
consists of four sections. The sections can
be combined into two cooking zones with
different size, or into one large cooking
area. You choose the combination of the
sections by choosing the mode applicable
to the size of the cookware you want to
use. There are three modes: Standard
(activated automatically when you activate
the hob), Big Bridge and Max Bridge.
Switching between the modes
To switch between the modes use sensor
field:
WARNING!
Refer to Safety chapters.
To set the heat setting use
two left side control bars.
.
• The function decreases the power to
the other cooking zones connected to
the same phase.
• The heat setting display of the reduced
zones changes between two levels.
When you switch between
the modes the heat setting is
set back to 0.
Diameter and position of the
cookware
Choose the mode applicable to the size
and the shape of the cookware. The
cookware should cover the selected area
as much as possible. Place the cookware
centrally on the selected area!
Place the cookware with the bottom
diameter smaller than 160 mm centrally on
a single section.
ENGLISH 11
100-160mm