Power Function; Power Management; Count Down Timer - Electrolux EHL7640FOK Manual De Instrucciones

Ocultar thumbs Ver también para EHL7640FOK:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

www.electrolux.com
8
12
11
10
9
8
7
6
5
4
3
2
1
0
1

POWER FUNCTION

The Power function makes more power
available to the induction cooking zones.
The Power function can be activated for a
limited period of time ( see Technical infor-
mation chapter). After that, the induction
cooking zone automatically sets back to
highest heat setting. To activate, touch
comes on. To deactivate, change the
heat setting.

POWER MANAGEMENT

The power management divides the power
between two cooking zones in a pair (see
the illustration). The power function increa-
ses the power to the maximum level for
one cooking zone in the pair. The power in
the second cooking zone automatically de-
creases. The heat setting display for the re-
duced zone changes between two levels.
2 3 4 5 6 7 8 9 10 11 12 13 14
TIMER

Count Down Timer

Use the Count Down Timer to set how long
the cooking zone operates for only this one
time.
Set the Count Down Timer after the se-
lection of the cooking zone.
You can set the heat setting before or after
you set the timer.
• To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate the Count Down Timer:
touch
of the timer to set the time (
00
99
-
minutes). When the indicator
of the cooking zone start to flash slow,
the time counts down.
• To see the remaining time: set the
cooking zone with
the cooking zone starts to flash quickly.
,
The display shows the remaining time.
• To change the Count Down Timer:
set the cooking zone with
or
.
• To deactivate the timer: set the cook-
ing zone with
maining time counts back to
indicator of the cooking zone goes out.
To deactivate you can also touch
at the same time.
When the countdown comes to an end,
the sound operates and
cooking zone deactivates.
• To stop the sound: touch
CountUp Timer ( The count up
timer)
Use the CountUp Timer to monitor how
long the cooking zone operates.
• To set the cooking zone (if more
than 1 cooking zone operate ) : touch
again and again until the indicator of
a necessary cooking zone comes on.
• To activate the CountUp Timer: touch
of the timer
indicator of the cooking zone starts to
flash slow, the time counts up. The dis-
. The indicator of
. Touch
. Touch
. The re-
00
. The
and
00
flashes. The
comes on. When the

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido