NSK Varios 970 Operación Manual página 11

(3) Power Level Setting
DO ENSURE Power setting does not exceed the recommended Power Level (Tip-Power Guide included in the package.)
) Select the Operating Mode with the Mode Select Keys on the Front Panel. The Indicator light over the selected mode
will illuminate. (Fig. 6)
Mode Select Keys
Operating Mode Display
2) Set the power level with the Power Level Key on the
Front Panel. The Bar Graph Indicator and Numerical
Display will indicate the selected power level. (Fig. 7)
Make sure the power level is set in the appropriate
range for the attached Tip.
NOTICE
• Press & Hold the Power Level Key will increase or
decrease the Power Level.
• If the Power Level is 0 (zero) and set the water
volume, Tip will not oscillate but water comes out
from the handpiece.
(4) Irrigation setting
Select the Irrigation Mode (L Bottle, R Bottle or Tap Water) with
the Irrigation Select Key on the Front Panel. (Fig. 8)
The Indicator light over the selected mode will illuminate.
Press & Hold the Irrigation Select Key to select Tap Water Mode.
(5) Operate Varios 970 / 970 LUX
Tip vibration will begin when the Foot Control is depressed. (For
Varios 970 LUX, Handpiece LED will illuminate.)
• Water Supply Volume Adjustment
Turn the Water Adjustment Knob counterclockwise gradually
to increase the supply volume. (Fig. 9) For detail, refer to P5
Bottle Water Adjustment Knob or P6 Tap Water Adjustment
Knob.
Power Level for each mode
Fig.6
Numerical Display
0
Power Level Key
Bar Graph Indicator
Irrigation Select Key
L Bottle Tap Water
Increase
Tap Water Adjustment Knob
Fig.7
R Bottle
Fig.8
Increase
Bottle Water Adjustment Knob
Fig.9