Component Names - NSK Varios 970 Operación Manual

2. Component Names

2

8
9 10
12 1
Option
16
15
* Operation Principle
A sinusoidal electrical signal, at ultrasonic frequency ( f > 20Khz ), is delivered by the generator. This signal is applied
to the 'piezoelectric ceramic' located inside the transducer. Piezoelectric ceramic converts this signal into mechanical
vibrations. These vibrations are at the same ultrasonic frequency as the electrical signal. The mechanical vibrations
are propagated towards the distal end of the transducer. The "TIP" insert, which is attached at the distal end of the
transducer, vibrates at ultrasonic frequencies and makes it possible to achieve the aimed purpose.
1
7
11
14
17
18
Optic Optic
4
6
No. Parts Name
1 Control Unit
2 VA Bottle
 AC Power Cord
4 Varios2 Handpiece (Optic or Non-Optic)
Handpiece Cord (Unshielded 2M)
5
6 Foot Control
7 Sterilization Case
8 Tip Wrench
9 Tip G4
10 Tip G6
11 Tip G8
12 O-Ring (Thin section) (For VA Bottle)
1 O-Ring (Thick section) (For VA Bottle)
14 O-Ring (For Handpiece Cord)
15 Water Connector (Option)
16 Water Tube (Option)
17 Spanner Wrench (5x8) (Option)
18 Tip Cover S (Option)
19 Tip-Power Guide
20 Tip Card
21 Operation Manual
* These are not on photo above.

Non-Optic Non-Optic
5
Quantity
1
2
1
1
1
(Optic or Non-Optic)
1
1

1
1
1
2
2
2
1
1
2
1
1*
1*
1*