Symbols; Safety Information - Amprobe IR-500 Manual De Uso

SYMBOLS

� Caution! Refer to the explanation in this Manual
* Laser light. Do not stare into laser beam
KY Caution ! Non-contact voltage
M Battery
Do not apply directly or around bare hazardous
live conductor.
� Conform to relevant Australian standards
�
Complies with European Directives
Do not dispose of this product as unsorted
=
municipal waste. Contact a qualified recycler

Safety Information

�
Warning
�
• Do not stare into laser beam.
• Do not point laser directly at eye or indirectly off
reflective surfaces.
• For use by competent persons only.
• Do not leave the unit on or near objects of high
temperature.
• Non-Contact Voltage function can only test on
insulated wires. Testing on high voltage wires
should keep a distance of 20mm minimum.
• Do not use the unit to sense wire voltage higher
than 600V.
1