Symbols; Unpacking And Inspection; Introduction; Operation - Amprobe TMD-10 Manual De Uso

SyMboLS

�
Refer to the manual
Conforms to relevant
�
Australian standards.
� Warning and Precautions
• The bead thermocouples supplied with the meter are not intended for
contact with liquids or electrical circuits.
• Do not mix thermocouple types.
• Match the polarity of the adapter to the polarity of the thermocouple
inputs.

UNPACkINg AND INSPECTIoN

Your shipping carton should include:
1 TMD-10 temperature meter
2 K-type thermocouples
1 9 volt battery
1 Manual
If any of the items are damaged or missing, return the complete package to
the place of purchase for an exchange.

INTRoDUCTIoN

The TMD-10 is a dual input temperature measurement meter using Type K or
Type J thermocouples.

oPERATIoN

1. Press the � button to turn power on or off
2. Set the Function Switch to °C or °F.
3. Select thermocouple type (K / J) and connect the thermocouple(s) to the
T1 or T2 input.
� Do not mix thermocouple types.
� Match the polarity of the adapter to the polarity of the thermocouple
input.
4. Expose the thermocouple(s) to the temperature(s) to be measured.
5. Read the LCD display.
Complies with EU
�
directives
Do not dispose of this
�
product as unsorted
municipal waste.
5