Changing Battery In The Remote Control - Eneo VMC-8.4LCD-CM Instrucciones De Montaje

9. Changing Battery in the Remote Control

. Pull the battery compartment out of the remote control.
. Insert the battery (type CR05).
The positive pole must be facing upwards.
3. Slide the battery compartment back into place.
10. Specifications
Type
Art. No.
Video standard
Display element
Screen size
Active area
Pixel format
Resolution
Pixel fault class
Colour scales
Contrast ratio typ.
Brightness typ.
Angle of view (L/R/B/T) typ.
Response time (typ.)
Horizontal resolution
Synchronization
PC interface
Video inputs (type)
Video inputs
Audio input
Loudspeaker
External adjustments
Menu languages
Supply voltage
VMC-8.4LCD-CM
90488
PAL, NTSC (Auto detection)
Colour TFT/LCD, Total no. of pixels: 480 000
8.4" (.3cm)
70.4 (H) x 7.8 (V) mm
800 (H) x 600 (V); 0.3x0.3mm
800x600 pixels max. (PC/RGB)
50:
350cd/m
2
50°, 50°, 35°, 55°
00ms (tr: 50 / tf: 50)
VESA standard: VGA to SVGA, 5 pin; automatic picture adjustment
Vp-p (C)VBS, 75ohms, (BNC), RGB
On/Off, Menu, Mode, Cursor
English, German, French, Spanish, Italian, Korean, Japanese
VDC ±5% (Power supply unit included)
4
VMC-0.4LCD-CM
.7 (H) x 58.4 (V) mm
800 (H) x 600 (V); 0.64x0.64mm
ISO 3406-, Class II
6,44 (6bit)
65°, 65°, 55°, 45°
40ms (tr: 0 / tf: 30)
Approx. 40TVL (CVBS)
TTL Separate, Composite
CVBS, RGB
–
–
90489
0.4" (6.4cm)
400:
50cd/m
2