Description Of Monitor And Controls - Eneo VMC-8.4LCD-CM Instrucciones De Montaje

4. Description of Monitor and Controls

Front
1. Mode button
Press the mode button to be appeared source select OSD box and press the button or mode button
repeatedly then press the menu button or wait 3 seconds to select highlighted source.
• If PC Picture size does not match with full horizontal or vertical screen size, press the mode button
continuously (2-3 seconds) and wait for a little while then you can see the most appropriate screen.
2. Menu button
Button to Setup Screen and Function
Press the mode button to be appeared menu OSD box and press the mode button repeatedly to select the main
menu (Picture menu, Setup menu), then press the button to enter the sub menu, press the mode button
repeatedly to highlight icon that user wants, press the button to increase, decrease or change the
function. Push the menu button once to return to the main menu to select anothet function or press twice to exit
from the OSD.
3. Down button
Select the sub menu, increase the selected function, hot key.
Quick Contrast
It is a function of Contrast control. When you push button, OSD displays CONTRAST word and number.
OSD disappears in 3 seconds after finishing operation.
. button to increase the Contrast
. This key can be used continuously or only once.
3. button decreases the Contrast
4. Up- button
Select the sub menu, decrease the selected function, hot key.
Brightness Quick
It is a function of Brightness control. When you pushed button. OSD displays BRIGHTNESS word and number.
OSD disappears in 3 seconds after finishing operation.
. button to increase the Brightness
. This key can be used continuously or only once.
3. button decreases the Brightness
7