Menu Item Description - JVC DLA-F110 Manual De Instrucciones

Adjustments and settings in the menu (continued)

Menu item description

All numbers for the items within [ ]are default settings.
It is possible to operate all items displayed in the menu display by pressing OK/BACK or the cursor (up,
●
down, left, right arrows).
Displayed items vary depending on the selected item in the menu and type of input signal or absence of
●
any signal.
[1] Picture Adjust
Picture Mode
Natural
Dynamic
3D
User 1
User 2
User 3
User 4
User 5
User 6
Color Temp.
Gamma
Normal
A (3D)
B (3D)
A
B
C
D
Custom 1
Custom 2
Custom 3
Contrast
Brightness
Color
Tint
Advanced
Reset
This manual downloaded from http://www.manualowl.com
Please refer to the description of each mode, and then use the mode to best suited for
you. Moreover, it is possible to adjust the image quality by using a user 1, 2, 3, 4, 5and 6.
Settings: Natural, Dynamic, 3D, User 1, User 2, User 3, User 4, User 5, User 6.
It is an image quality setting with natural color/tone. Suitable for viewing video material,
such as dramas/serials.
This is the picture setting best suited for viewing the picture in a room that cannot be
made completely dark.
This is an image quality setting for watching 3D movies.
The users 1, 2, 3, 4, 5, and 6 should adjust the image quality as desired in each case.
Data of the last adjustment is saved.
It is possible to set the color temp.
To "[1-1] Color Temp." of the submenu
It is possible to set the gamma curve. Please set to your preference.
Settings: Normal, A (3D), B (3D), A, B, C, D, Custom 1, Custom 2, Custom 3
Typically we recommend this setting.
(*) It is not possible to set it when the "Picture Mode" is set to "3D".
A (3D), B (3D) can only be set, if the "Picture Mode" is "3D".
This is the normal gamma curve for 3D.
A (3D) will be brighter.
A, B, C, D cannot be set if the "Picture Mode" is "3D".
In regard to normal gamma, this is a gamma curve focused on tone.
This is a gamma curve for the film's unique S curve.
This is a gamma curve that – in regard to the gamma of B – emphasized even more the
feeling of contrast.
For normal, this is a gamma curve where the intermediate gradations look very bright.
Custom 1, 2, 3 cannot be set if the "Picture Mode" is "3D".
Under submenu "[1-2-2] Custom Gamma", it is possible to change the gamma curve and
save it.
The initial value of Custom 1, 2, and 3 is the same as for "Normal".
Adjusts the contrast of the video images.
Settings: (blackish) -50 to 50 (whitish)
You can adjust the brightness of the video image.
Settings: (dark) -50 to 50 (bright)
Adjust the color intensity of the video images.
Settings: (dim), -50 to 50 (saturated)
Adjusts the image tint of the video images.
Settings: (reddish) -50 to 50 (greenish)
Functions such as contour correction, custom gamma and color management can be set
to sub-menu "[1-2] Advanced".
Sets settings to default factory settings.
ENGLISH
[Natural]
[Normal]
43