JVC DLA-F110 Manual De Instrucciones página 45

Adjustments and settings in the menu (continued)
Color Management
Clear Motion Drive
Off
Mode 1
Mode 2
Mode 3
Mode 4
Inverse Telecine
CMD Demo
Left
Right
Top
Bottom
Off
Lens Aperture
Lamp Power
Normal
High
[1-2-1] Sharpness
Sharpness
Detail Enhance
This manual downloaded from http://www.manualowl.com
It is possible to set the color of the screen to the preferred color and save it.
To "[1-2-3] Color Management" of the submenu.
It improves video images with fast movements to produce clear video images with little
residual image retention.
For PC and 3D signals, the "Clear motion Drive" cannot be set.
Moreover, it may happen that the image is distorted in some scenes, or light and dark
flashes occur. In this case, please choose "Off", etc., and then a setting of your choice.
Settings: Off, Mode 1, Mode 2, Mode 3, Mode 4, Inverse Telecine
Off
Black insertion weak
Black interpolation strong
Interpolation weak
Interpolation strong
With 60i/60p signals, e.g of TV-broadcast and DVDs, original 24 frame video image
footage is changed to a 24 frame display.
(*) 24p will not function.
It is possible to confirm the effect of the setting of Mode 3 and Mode 4 of the Clear motion
drive. Upon pressing the button "OK", it will be displayed on all sides of a screen in the
center split into two parts. Finally, it will turn to "Off". It cannot be set for PC and 3D
signals.
Settings: Left -> right -> top -> Bottom -> Off (changed with "OK" button)
The left screen displays a demonstration of the Clear motion drive.
The right screen displays a demonstration of the Clear motion drive.
The upper screen displays a demo of the Clear motion drive.
The screen below displays a demo of the Clear motion drive.
The Demo of the Clear motion drive is turned off.
Adjusts the amount with which the optical iris is squeezed. A setting of 0 means fully
opened.
Settings: (Dark) -15 to 0 (bright)
It is possible to change the brightness of the lamp.
(*) If continually used with "High", the lamp will become dark earlier.
(*) The more one lets the interior temperature of the device rise due to generation of heat,
the less the level of tolerance against high temperatures.
(*) For about 60 seconds after the lamp is lit, the lamp cannot be switched off.
Settings: Normal, High
Normally this setting is chosen.(160W drive)
In a bright room, when the video is hard to see, this setting is chosen.(220W drive)
Emphasizes the outlines of video images. Please adjust to your preference.
Values: 0 to 50 (clear)
It makes minute details of the video images stand out. Please adjust to your preference.
Values: 0 to 50 (strong)
ENGLISH
[Off]
[Off]
[0]
[Normal]
45