JVC DLA-F110 Manual De Instrucciones página 44

3
Adjustments and settings in the menu (continued)
[1-1] Color Temp.
(Preset value)
High Bright
Custom 1
Custom 2
Custom 3
Gain
Red
Green
Blue
Offset
Red
Green
Blue
[1-2] Advanced
Sharpness
NR
RNR
MNR
BNR
Custom Gamma
44
This manual downloaded from http://www.manualowl.com
Operation
Set the color temp. of the video images.
Please adjust to your preference.
(*) For this setting, the setting items can differ in accordance with the "Picture Mode".
Settings: (Preset value), High Bright, Custom 1, Custom 2, Custom 3
You can set the Color Temp. to 5500K, 6500K or 9500K.
It is said that a value of 6500K produces a well balanced video image.
Settings: (reddish) 5500, 6500, 9500 (bluish)
Select this to get the brightest image.
(*) It is not possible to set it when the "Picture Mode" is set to "3D" or "Natural".
You can adjust the color temp. and save each Custom 1, 2, and 3.Please save your
preferred adjustment values and enjoy it.
It is possible to adjust the bright part of the video images for each color.
Settings: (Weak red) -255 to 0 (strong red)
Setting: (Weak green) -255 to 0 (strong green)
Setting: (Weak blue) -255 to 0 (strong blue)
For each color, the dark areas of the video images can be adjusted.
Settings: (Weak red) -50 to 50 (strong red)
Setting: (Weak green) -50 to 50 (strong green)
Setting: (Weak blue) -50 to 50 (strong blue)
You can set the sharpness and detail enhance to "[1-2-1] Sharpness" of the submenu
Reduces the noise of the video images. Please adjust to your preference.
Adjusts the intensity of random noise elimination of the image.
Values: (Low) 0 to16 (strong)
Adjusts the intensity of mosquito noise elimination of the video images.
(*) It is not possible to set it when the "Picture Mode" is set to "3D".
Moreover, it is not possible to set it when there is an input of HD input signals.
Values: (Low) 0 to16 (strong)
Reduces the block noise of the video images.
(*) ) It is not possible to set it when the "Picture Mode" is set to "3D"
Moreover, it is not possible to set it when there is an input of HD input signals.
Settings: On, Off
It is possible to set the gamma curve and save it. Please adjust to your preference.
To "[1-2-2] Custom Gamma" of the submenu
[Preset value]
[6500]
[0]
[0]
[0]
[0]
[0]
[0]
[0]
[0]
[Off]