Sennheiser MKE 2-2R Manual De Instrucciones página 7

Condensor clip-on microphone with omni-directional characteristic for top sound-
quality and robustness requirements. Suitable for vocal transmission and miking
up instruments in all fields of live sound transmission.
Characteristics
Extremely small size
Insensitive to structure-borne noise
Linear frequency response
Robust
Note
If the microphone is fastened as shown or in a similar manner, it is essential to
ensure that
it is not in direct contact with the skin
it is covered up whilst make-up is applied in order
to prevent contamination of the sound inlet.
Attachment to articles of clothing
MZQ 2: this clip serves to attach the mic to the collar, lapel or button hole etc.
The pin MZS 2 can be used for rough clothing. The ZH 2 pin provides high
stability. This pin is also suitable for articles of clothing which do not have a collar
or lapel to attach the mic with the MZQ 2 clip.
MZM 10+MZM 2: this magnetic clip is quite unobtrusive. Often the frictional force
between the mic and the clothing is sufficient to guarantee that the microphone is
not dislocated. In addition, the neckstrap (included) ensures that the mic cannot be
displaced from its proper position, especially with regard to smooth clothes.
Storing the microphone
The microphone should be stored in a dry room.
If the operating conditions deviate substantially from the climatic conditions
in the storage room, the microphone, should be exposed to the new climatic
conditions for roughly 15 minutes prior to operation.
MKE 2