KREAFUNK aGLOW Manual De Instrucciones página 6

If you do experience any problems
with your product please contact
the retailer you purchased the
product from. The retailer will
provide you with guidance and if
that does not solve the problem
the retailer will handle the claim
directly with KREAFUNK.
TURNING YOUR aGLOW
ON / OFF
1. Press and hold the power
button for 1-2 seconds
to turn on aGLOW. The lamp
will give a brief white gleam,
and the LED ring will briefly
stay solid blue, and a prompt
sound will play – indicating that
aGLOW is turned on.
2. Press and hold the power
button for 1-2 seconds to
turn off aGLOW. The LED ring
will briefly stay solid red, and
a prompt sound will play –
indicating that aGLOW is turned
off.
6
PAIRING YOUR aGLOW TO
A DEVICE
1. After turning on aGLOW the
LED ring starts flashing blue.
This means aGLOW is in
Bluetooth pairing mode, and it
will continue flashing blue until
paired to a Bluetooth playback
device.
2. Enable your smartphone's
or another playback device's
Bluetooth function and search
for Bluetooth devices.
3. Select 'aGLOW' from the list
of found Bluetooth devices.
When aGLOW is successfully
connected you will hear a
prompt sound and the LED ring
will turn off.
From now on, every time you turn
on aGLOW and your Bluetooth
device simultaneously, they will
automatically connect.
English