KREAFUNK aGLOW Manual De Instrucciones página 7

PAIRING TO ANOTHER
DEVICE (PAIRING MODE)
To enter pairing mode to pair with
another device than the active one,
press and hold the pairing button
for 2 seconds until the LED
ring starts flashing blue and red.
aGLOW will play a short prompt
sound. It is now ready to pair with
any other Bluetooth devices.
If aGLOW is disconnected from
all previous devices, it will
automatically enter pairing mode
and the LED ring starts flashing
blue and red alternately.
PAIRING TWO aGLOWs
FOR TRUE WIRELESS
STEREO (TWS)
1. Turn on the two aGLOW
speakers, and make sure
they are not connected to any
Bluetooth playback devices.
If one or both aGLOW are
connected to a device, please
disconnect them.
2. Briefly press the pairing button
on one aGLOW to activate
TWS mode. The LED ring will
flash cyan, while playing a
short prompt sound. Now, this
aGLOW functions as the 'master
speaker' and will search for the
other aGLOW. When the other
aGLOW is connected, you will
hear one more prompt sound.
3. When the two aGLOWs are
paired, the 'master speaker'
will automatically change into
regular Bluetooth pairing mode.
Now, you can pair it with your
Bluetooth playback device and
enjoy True Wireless Stereo.
The 'master speaker' will play left
channel, while the other aGLOW
will play right channel.
4. To disconnect two TWS
paired speakers and reset
TWS pairing, press and hold
the pairing button
seconds.
English
for 2
7