Defrost function
By pressing the button "Defrosting"
and toasted . With this, the toaster slowly warms the bread . Activating the defrost
function will allow the frozen bread to achieve the same browning level as when
you toast fresh bread .
1) After setting the desired browning level, insert the bread into the toaster
slots 7 .
2) Press the operating button 8 downwards .
3) Press the button "Defrosting"
4) When the defrosting and toasting process is finished, the toaster switches itself
off automatically, the control lamp integrated in the button "Defrosting"
goes out and the bread slices are ejected to the top .
NOTE
►
Press the "Defrost" button
The integrated control lamp goes out and the defrost process switches to
a normal toasting process .
Crisping bread rolls
Never lay bread rolls directly onto the toaster, always use the bread roll rack 6 .
1) Fold out the two feet of the bread roll rack 6 .
2) Place the bread roll rack 6 onto the appliance so that the feet protrude into
the toasting slots 7 and the bar between the toasting slots 7 fits into the
arched sections on the feet . In this position, the bread roll rack 6 sits on the
appliance stably .
3) Place the bread rolls onto the rack and start the toasting procedure . Turn the
toasting dial 2 up to level 2
vary depending on the composition and type of bread roll .
NOTE
►
After toasting, the rolls will be very hot .
4) As soon as the toaster switches itself off, turn the rolls over to crisp the other
side and then switch the toaster back on .
5) When you are finished with the bread roll rack 6, you can fold it for space-
saving storage:
–
Wait until the bread roll rack 6 has cooled down .
–
Remove it from the appliance .
–
Gently push the feet of the bread roll rack 6 inwards so they fold in and
lie flat .
■
26
│
GB │ IE
5, also frozen bread can be thawed
5 . The integrated control lamp glows .
5 again to switch off the defrost function .
, at most . The actual level of browning can
5
STC
920 A1