Mounting The Outlet Port (Optional) - Dometic CRX1065D Instrucciones De Montaje

CRX
7.2 Notes on installing the refrigerator
Observe the following when installing the refrigerator:
• Install the refrigerator so that the warm air produced can easily flow away
(either upwards or to the sides, fig. 3, page 4).
Key for fig. 3, page 4
No. Explanation
1 Cold intake air
2 Hot waste air
3 Condenser
4 Spacing above the refrigerator if there is not sufficient air to circulate
above or at the side.
• Observe the installation dimensions in fig. 4, page 4.
• Keep objects clear of openings in the housing or installation structure (such as
ventilation slots, etc.).
• Condensate is produced when the refrigerator is operating normally. You can
either wipe up the condensate on the floor of the refrigerator in regular intervals,
or drain it through an outlet in the floor of the refrigerator (see chapter "Mounting
the outlet port (optional)" on page 17).
7.3

Mounting the outlet port (optional)

➤ Connect a hose with an inside diameter of 10 mm (not included) to the outlet
port.
➤ Lay the refrigerator on its side in order to access the bottom side.
➤ Mount the outlet port (fig. 5 2, page 5) aligned to the front or to the back
according to the desired outlet direction.
➤ Remove the drain plug (fig. 5 1, page 5) inside the refrigerator.
EN
Installing and connecting the refrigerator
17