Mounting The Water Drain Outlet (Optional); Installing The Refrigerator - Dometic CRX Serie Instrucciones De Montaje

Installing and connecting the refrigerator
Model Dimensions W x H x D (mm)
CRX80 485 x 650 x 578
CRX110 530 x 755 x 608
CRX140 550 x 825 x 670
• Keep objects clear of openings in the housing or installation structure (such as
ventilation slots, etc.).
• Condensate is produced when the refrigerator is operating normally. You can
either wipe up the condensate on the floor of the refrigerator in regular intervals,
or drain it through a water drain outlet in the floor of the refrigerator (see chapter
"Mounting the water drain outlet (optional)" on page 24).
7.3

Mounting the water drain outlet (optional)

➤ Connect a hose with an inside diameter of 10 mm (0.4 inch) (not included) to the
water drain outlet.
➤ Lay the refrigerator on its side in order to access the bottom side.
➤ Mount the water drain outlet (fig. 9 2, page 8) aligned to the front or to the
back according to the desired direction.
➤ Remove the water drain plug (fig. 9 1, page 8) inside the refrigerator.
7.4

Installing the refrigerator

Proceed as follows to install the refrigerator:
➤ If you wish to drain the condensate through a hose:
Mount the water drain port (see chapter "Mounting the water drain outlet
(optional)" on page 24)
➤ Undo the transport lock (chapter "Releasing the lock" on page 30).
➤ Open the refrigerator door.
➤ Remove the blanking plugs (fig. 0 2, page 8).
➤ Push the refrigerator into the recess.
➤ Fix the refrigerator in place using suitable screws (fig. 0 1, page 8).
➤ Press the blanking plugs (fig. 0 2, page 8) into the openings.
24
Dimensions W x H x D (inch)
19.09 x 25.59 x 22.76
20.87 x 29.72 x 23.94
21.65 x 32.48 x 26.38
CRX
EN