Mounting The Water Drain Outlet (Optional); Installing The Refrigerator; Changing The Door Hinge - Dometic COOLMATIC CRX50 Instrucciones De Montaje Y De Uso

CRX50, CRX65
• Keep objects clear of openings in the housing or installation structure (such as
ventilation slots, etc.).
• Condensate is produced when the refrigerator is operating normally. You can
either wipe up the condensate on the floor of the refrigerator in regular intervals,
or drain it through a water drain outlet in the floor of the refrigerator (see chapter
"Mounting the water drain outlet (optional)" on page 17).
7.2

Mounting the water drain outlet (optional)

➤ Connect a hose with an inside diameter of 10 mm (0.4 inch) (not included) to the
water drain outlet.
➤ Lay the refrigerator on its side in order to access the bottom side.
➤ Mount the water drain outlet (fig. 5 2, page 6) aligned to the front or to the
back according to the desired direction.
➤ Remove the water drain plug (fig. 5 1, page 6) inside the refrigerator.
7.3

Installing the refrigerator

Proceed as follows to install the refrigerator:
➤ If you wish to drain the condensate through a hose:
Mount the water drain port (see chapter "Mounting the water drain outlet
(optional)" on page 17)
➤ Undo the transport lock (chapter "Releasing the lock" on page 22).
➤ Open the refrigerator door.
➤ Remove the blanking plugs (fig. 6 2, page 6).
➤ Push the refrigerator into the recess.
➤ Fix the refrigerator in place using suitable screws (fig. 6 1, page 6).
➤ Press the blanking plugs (fig. 6 2, page 6) into the openings.
7.4

Changing the door hinge

You can also change the hinge of the door, so that it opens to the left rather than the
right.
➤ Proceed as shown (fig. 7, page 7 to fig. 9, page 7).
EN
All manuals and user guides at all-guides.com
Installing and connecting the refrigerator
17