dirna Bergstrom bycool COMPACT 1.4 Instrucciones De Montaje página 25

COMPACT 1.4
11 Connect the (2) 4-way boxes and the (2) 2-way
boxes and connect the power cable in the 2-way
box in a "T" between the unit and the interior air
distribution panel.
NOTE: It is very important not to invert the
colours of the condenser fan 2-way box (box
with R and N wires).
12 Position the interior air distribution panel on the
studs closest to the front glove compartments
on the metal, and secure with M6x25 hexagon
(Take care to ensure there is no cabling which
interferes between the ducts and the unit).
CAUTION: Position the interior air distribution
panel so the ducts fit against the unit's base
seal.
11
12
25
EN
®