dirna Bergstrom bycool COMPACT 3.0 Instrucciones De Montaje página 24

COMPACT 3.0
EN
Position nut M6 (A) after the fastening nut of
16
the interior air distribution panel on each stud.
Position M6 hexagons, screwing up to 1 mm
above the upholstery in vehicles with Space
Cab and 10 mm below the upholstery in other
vehicles. Unscrew M6 nuts (A) of this point
until they come into contact with the hexagons,
and tighten against them.
16
Other cabins
16
EPDM
seal
Cabin ceiling
Upholstering
Space Cab - 1 mm.
Other models - 10 mm.
Super Space Cab
Base
(A)
M6 Nut
M6 stud
M6 Hexagons
16
1 mm
Aprox.
16
Cabine Super Space Cab
Interior air distribution panel
24
Compact Base
M6 hexagon
(A)
Upholstering
Other models
10 mm
Foam
®