Moving Your Appliance - THOMSON THM 70 IX Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44
GB 
Super freezing   
This function will help food to freeze quickly and retain its nutrients, vitamins, flavours and appearance. 
To set super freezing time, touch this button and the super freezing symbol 
and time will flash on the display. 
+
While the symbol and time are flashing, repeatedly press 
 /-  to select the desired super freezing time 
up to 26 hours. The temperature of the freezer compartment cannot be adjusted.   
 
When the super freezing time is reached, super freezing function will be automatically canceled and the 
symbol will disappear from the display.   
You may also cancel the function by pressing the Auto button.     
 
 
Auto   
Touch this button to select automatic function. The display will show the auto symbol 
and the temperatures in the fridge and freezer compartments will be 4°C and ‐18°C 
respectively on the display.   
 
To cancel this function, touch this button again. The auto symbol will disappear from the display and the 
display will restore the set temperatures of the fridge and freezer compartments.     
 
 
Alarm   
Door open alarm: 
When the fridge door and/or freezer drawers are left open or not closed completely for about 3 minutes, 
the appliance will sound an alarm. 
Close the fridge door and/or freezer drawers then the alarm will stop.   
 
Temperature alarm: 
If the temperature in the freezer compartment is higher than ‐10°C, the temperature of the freezer 
compartment will flash on the display until the temperature in the freezer compartment drops below 
‐10°C again. 
 
 
Error codes 
When an error occurs in the appliance, the display will show the corresponding error code (such as E0, 
E1 or E2) and the alarm symbol 
. Please contact the local authorised service centre.   
 
 
 
MOVING YOUR APPLIANCE 
If the appliance is turned off for any reason, wait for 10 minutes before turning it back on. This will allow 
the refrigeration system pressures to equalise before restarting.   
 
 Turn off the appliance and unplug it from the mains socket. Remove all food. Also remove all mobile 
parts (shelves, accessories, etc.) or fix them into the appliance to avoid any shock. 
 Relocate and install. If the appliance has been left on its side for any length of time, leave it standing 
8

Publicidad

Tabla de contenido
loading

Tabla de contenido