CLEANING AND MAINTENANCE
Do not use abrasive cleaning agents or solvents.
1. Disconnect the mains plug from the mains socket.
2. Take out the food and store in a cool location.
3. Clean the appliance with a soft cloth, warm water and detergent.
4. Wipe the door seal with clear water only and then wipe dry thoroughly.
5. After cleaning reconnect and set the temperature as desired.
6. Put the food back into the appliance.
The LED light in the fridge cannot be replaced by the user. If the LED light stops working, please contact
the local authorised service agent.
TROUBLESHOOTING
If there is a problem with your appliance, please check the following points before contacting customer
service.
Problem
Appliance does
No electricity at power outlet.
not operate.
Noises
Cabinet not stable or level.
Appliance not
Temperature setting not correct.
cool
Frequent door openings.
Large amount of food recently
added.
Possible causes
Possible solution
Check that the plug is correctly connected
and power switched on.
See installation section.
See Adjusting the Temperatures and
Functions section.
Minimise door openings to allow
temperatures to stabilise.
GB
13