Moving Your Appliance - THOMSON CTH 310 GLW Manual De Instrucciones

Frigorífico-congelador
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

 
The function will be cancelled if the smart ECO or quick cool function is activated.   
 
To manually cancel this function 
1. Repeatedly press Function until the vacation indicator light is flashing on the display.   
2. While the indicator light is flashing, press OK. 
 The indicator light will go out. 
 The temperature of the fridge compartment will return to its previous setting.   
 
 
Power off memory   
The appliance will keep all the settings in case of power off. When the appliance is plugged in, the 
appliance will operate with the previous settings.   
 
 
Fridge door open alarm 
When the fridge door is left open or not closed completely for about 3 minutes, the appliance will sound 
an alarm. Close the fridge door to stop the alarm.   
 
You can also press any button to temporarily stop the alarm. After about 3 minutes the appliance will 
sound an alarm again.     
   
 
Over‐temperature alarm in the freezer compartment (only in case of power on) 
After the appliance is powered on, if the measured temperature in the freezer compartment is higher 
than ‐10°C, the measured temperature of the freezer compartment will flash on the display.   
 
Press any button or wait for about 5 seconds to make the temperature stop flashing. The temperature of 
the freezer compartment will return to the previous setting.   
 
 
Error codes 
When an error occurs in the appliance, the display will show the corresponding error code (e.g. E0, E1, 
E2, etc.). Please contact the local authorised service centre.     
 
 
 
 
MOVING YOUR APPLIANCE 
If the appliance is turned off for any reason, wait for 10 minutes before turning it back on. This will allow 
the refrigeration system pressures to equalise before restarting.   
 
 Turn off the appliance and unplug it from the mains socket. Remove all food. Also remove all mobile 
parts (shelves, accessories, etc.) or fix them into the appliance to avoid any shock. 
 Relocate and install. If the appliance has been left on its side for any length of time, leave it standing 
upright for at least 10 minutes before turning on.   
 
Your appliance uses isobutane (R600a) as a refrigerant. Although R600a is an environmentally friendly 
GB 
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Cth 310 glass blackCth 310 glass silver

Tabla de contenido