CLEANING AND MAINTENANCE
Do not use abrasive cleaning agents or solvents.
1. Set the temperature control knob to the "
socket.
2. Take out the food and store in a cool location.
3. Clean the appliance with a soft cloth, warm water and detergent.
4. Wipe the door seal with clear water only and then wipe dry thoroughly.
5. After cleaning reconnect and adjust the temperature control knob as desired.
6. Put the food back into the appliance.
Bulb replacement
1. Set the temperature control knob to the "
socket.
2. Unscrew the screw and remove the lamp cover.
3. Unscrew the bulb and screw a new 15W (E14 base) bulb.
4. Replace the lamp cover and fix it in place by fastening the screw.
TROUBLESHOOTING
If there is a problem with your appliance, please check the following points before contacting customer
service.
Problem
Appliance does
No electricity at power outlet.
not operate.
Noises
Cabinet not stable or level.
Appliance not
Temperature setting not correct.
cool
Frequent door openings.
Large amount of food recently
added.
0
" position and disconnect the mains plug from the mains
0
" position and disconnect the mains plug from the mains
Possible causes
12
Possible solution
Check that the plug is correctly connected
and power switched on.
See installation section.
See temperature control section.
Minimise door openings to allow
temperatures to stabilise.
12