Locking The Record Mode - Security Lock Function; Recording On The Same Cassette Repeatedly - Repeat Recording - Sony SVT-96LP Manual De Instrucciones

Locking the Record Mode —
Security Lock Function
Locking the record mode is useful to guard against
accidental recording interruptions when the VCR is
used for surveillance or monitoring purposes.
To set the security lock
While pressing MENU B, press MENU +.
The indicator lights in the display window.
The security lock function also works in timer
recording and playback modes.
To release the security lock
While pressing MENU B, press MENU –.
The indicator turns off.
MENU +
MENU B
MENU B MENU –
Recording on the Same Cassette
Repeatedly — Repeat Recording
You can record on the same cassette repeatedly in two
different modes: REPEAT 1 and REPEAT 2.
2
REPEAT 1
indicator
1
Turn on the power of the equipment to be used.
2
Set REPEAT REC to ON.
The REPEAT indicator lights.
3
Press MENU and MENU V until "4" of the MAIN
MENU flashes on the monitor screen.
4
Press MENU B.
The GENERAL SET menu appears.
5
Press MENU V to move the flashing to the setting
of TAPE END MODE and set to REPEAT 1 or
REPEAT 2 by pressing MENU + or –.
GENERAL SET
TAPE E–240
TAPE IN MODE STOP
TAPE END MODE REPEAT 1
TAPE USED COUNT OFF
CLOCK ADJUST 0 1 : 0 0
APC ON
THREAD CHECK OFF
T/D SEARCH CONVENTION
BAUD RATE 1 9 2 0 0
< >
NEXT PUSH
+
–
SELECT : DATA SET : / RETURN : MENU
REPEAT 1: If an alarm input is received during
repeat recording, the recording mode switches to
alarm recording. After the end of the tape is
reached, the tape is automatically rewound and
stops at the beginning. The OFF indicator lights
in the display window.
REPEAT 2: If an alarm input is received during
repeat recording, the recording mode switches to
alarm recording. Repeat recording is performed
regardless of whether an alarm input is received
or not.
3-5 6 7
21