Linear Calibration; Balance Counting Operation; Balance Counting; Note - Baxtran ABS6 Manual De Usuario

ABS
load the weight.
c. "---" is displayed briefly to indicate completion of span calibration and soon the balance returns to
waiting mode.
d. Repeat calibration several times, Do it as slowly as possible or operate linear calibration after first
calibration.

4.3. LINEAR CALIBRATION

a. Verify that the pan is empty, press and hold
release the
b. Press and hold
bration values, the blinking number indicates which weight should be placed on the pan.
c. Load the indicated weight, and wait for the display number stops blinking, it means the balance has
record this linear value. Unload the weight.
d. Wait for the next blinking number, repeat step "c" to calibrate the next value.
e.
When the display briefly shows "0.000", it means the linear calibration is completed.

5.1 BALANCE COUNTING

a. Verify the balance is on the waiting mode (tare) which the display shows "0.000", and shortly press
key, the display will show "10" and blink. The "g" on the right-bottom will change to "pcs".
b. Press the key to select a sample size which will change sequentially as following 10-20-50-100-
150-200-250-500.
c. Place the same number of samples you selected on the pan then press
operation.
5.2 NOTA
User can press
Press the key to changes it as following sequence "CT" (carat), "OZ" (ounce), "1b" (pound), "g"
(gram). The default unit is "g".
MODEL
Capacity (kg)
Fraction (g)
Pan size (mm)
Dimensions (mm)
Net Weight (kg)
Warm up (minutes)
key.
key about 5 seconds, the display starts to show the every session of linear cali-
key again to exit the counting function and return to the waiting mode.
ABS6
key about 5 seconds, when the display shows "CAL",

5. BALANCE COUNTING OPERATION

6. CHANGE THE UNIT DISPLAY

6
0,05
2115 x 295
310 x 310 x 115
3,9/5
10-20
User's Guide
key into the counting

7. SPECIFICATION

ABS30
30
0,1
11