Calibration; Calibration Linear - Baxtran BW Serie Manual De Usuario

The next parameter is the backlight control. The standard consists in that the backlight work automatically, turning off when the scales
does not use. The backlight can be set with "EL ON", "EL AU" (Automatic) or "EL Off". The maximum duration of the battery achieves
when the backlight turns off.
Press the button
With '' Au On "the memory will accumulate the weight automatically, " Au Off "will allow the manual accumulation and with"P COnt"the
RS-232 interface will send the weight continuously and the function of accumulation will be disabled
Press the button
With '' ACC ON "when you press will make the accumulation,
With " ACC OF "only will print, without accumulation.
Press the button
The value of auto zero is the next. You can select between 0, 5 d, 1 d, 2d and 4 d. Press the button
afterwards press the button
The unit of weight will show to continuation.
The scales are calibrated and weight in kilograms, however will show him the weight in grams, you pounds if you selects this function
Press the button
other units of weight, the function of accumulation will continue saving the weight in kilograms.

10. CALIBRATION

10.1. CALIBRATION LINEAR

To start with the calibration, turn off the scales and go back to light it. Press
from 9 to 0 in the screen
The screen will show "unLOAD". Unlocal all the weight of the pan and press
The screen will show to continuation the first calibration. Put the weight on the platform and press
The scale must to be stable to accept weight. The indicator of stability will light to show that the value is stable. After completing all
the calibration of weight, press
the last weight.
CALIBRATION OF WEIGHTS
MODEL
Weight 1
Weight 2
Weight 3
12
to change the value, afterwards press the button
to change the value, afterwards press the button
to change the programming, afterwards press the button
.
to change the value, afterwards press the button
to complete the calibration. The scales will begin to explain backwards to zero after selecting
SERIE BW
BW3
ZERO ZERO
1kg
3kg
BW6 BW15
ZERO
2kg 5kg
6kg 15kg
USER'S MANUAL BW
he automatic accumulation is the following step.
.
.
to change the programming,
when the scales was programmed to weigh with
and together during the initial account,
to go back to the point zero.
when the scales was stable.
BW30
ZERO
10kg
30kg
EN EN