SATA jet 4000 B Instrucciones De Servicio página 117

Ocultar thumbs Ver también para jet 4000 B:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 131
Operating instructions SATAjet 4000 B RP/HVLP (DIGITAL)
The painter is not exposed to vibrations while using the spray gun. Recoil
forces are minimal.
6.4. Use In Explosive Areas
Ex-sign
Equipment cat-
egory
6.4.1 General
The spray gun is approved for the use / storage in explosive areas of Ex-
Zone 1 and 2.
• The following applications and operations lead to the loss
of the explosion protection and are, therefore, prohibited:
• Use of the spray gun in explosive areas belonging to ex-zone 0!
• Do not use solvents and cleaning agents based on halogenised
hydrocarbons! Chemical reaction which may occur when using these
substances may be explosive!
6.4.2
Additional Information on the Electronic
Pressure Gauge
The electronic pressure gauge has passed a design examination. It has
been developed, constructed and manufactured in accordance with the
EU directive 94/9 EU. It has been classified according to Ex ia IICT4 Ga
or Ex ia IICT4 Gb. It may be used and stored in the explosive zones 1 and
2 up to 60°C ambient temperature. Inspection authority: KEMA 05 ATEX
1090 X.
The following applications and operations lead to the loss of
the explosion protection and are, therefore, prohibited:
• Battery replacement in explosive areas!
• Removal of the front cover of the pressure display!
Device category
Warning! Risk of explosion!
Warning! Risk of explosion!
Gas category
Temperature level
EN
117

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido