Basic Operation; To Stop Playback - JVC RC-EX25S Manual De Instrucciones

Basic operation

5
1 Press CD/RANDOM to enter CD mode, if the unit
is in TUNER or TAPE mode.
You can press CD/RANDOM on the remote control
unit to enter CD mode.
2 Press ) PUSH to open the disc door.
3 Load a disc with the label side facing up and close
the disc door.
• 8-cm CD can be played on the unit without an
adapter.
4 Press PLAY/PAUSE 3/8 to start playback.
You can start playback by pressing CD PLAY/PAUSE
on the remote control unit.
The current track number and elapsed playing time
are displayed during playback.
CD
5 Adjust the volume.
Notes:
• The following indication may be displayed when the
disc is loaded upside down. Reload the disc correctly.
CD
• If mistracking occurs during playback, lower the
volume.
• Mistracking may occur if a strong shock is applied to
the unit or if it is used in a place subject to vibrations
(e.g. in a car travelling on a rough road).
• If you press CD/RANDOM while in CD mode, the unit
enters the random playback mode.
1 3 2 4
PUSH
REMOTE
DISPLAY
SENSOR

To stop playback

Press STOP 7.
You can press STOP on the remote control unit to stop
playback.
STOP
Main unit
Caution:
Stop playback before opening the disc door. Check that
the disc has completely stopped rotating before
unloading the disc.
To pause playback
Press PLAY/PAUSE 3/8 during playback.
You can press CD PLAY/PAUSE on the remote control
unit to pause playback.
To resume playback, press the button again.
Main unit
1 4 5
STANDBY/ON DISPLAY
CD/ TUNER/
BAND TAPE
RANDOM
CD PLAY
INTRO STOP /PAUSE
FM MODE
HBS/
+
CD REPEAT/ PRESET EQ
+
PRESET MUTING VOLUME
– –
RM-SRCEX25A REMOTE CONTROL
STOP
Remote
CD PLAY
/PAUSE
Remote
10